您好,欢迎来到杭州盛迅金属制品有限公司网站!

服务热线:153-5610-9028
您现在的位置: 网站首页>新闻中心
全国热线153-5610-9028

怎么选择冲压模具厂?

发布者:admin    【2018年07月25日】

最近工厂模具车间比较忙,但是又有几个客户产品种类比较多,所以考虑将几十套冲压模具外协出去,这期间大约花费了将近半个月的时间的来考察,总结出了几点需要注意的事项,希望给哪些正在找冲压模具厂的朋友提供一些帮助,同样也可以让模具厂知道客户需要的是什么。


Recently, the factory mold workshop is busy, but there are a few kinds of customer products, so considering dozens of stamping die out, this period took about half a month to inspect, summed up a few points to pay attention to, which is looking for some friends who are looking for stamping and die factories to provide one Some help can also make mold factories know what customers need.


怎么选择冲压模具厂?


一,加工精度


First, processing precision




要想保证好冲压件的精度,首先就要保证好模具的精度。只有高精度的模具才能加工出合格的冲压件,而且模具精度得到保证,也能很好的延长冲压模具的使用寿命。现在冲压厂的利润已经解决冰点,如果模具使用寿命太短,又间接的给冲压厂增加了不小的成本支出。模具精度控制不好,后续的冲压生产中,就会麻烦不断,不仅耽误工期还可能会造成冲压厂丢掉客户。


To ensure the accuracy of stamping parts, first of all, we must ensure the accuracy of the mold. Only high precision dies can produce qualified stamping parts, and the mold accuracy is guaranteed, and the service life of stamping dies can also be prolonged. Now the profit of the stamping plant has already solved the freezing point. If the service life of the die is too short, it will indirectly increase the cost for the stamping plant. Mold precision control is not good, subsequent stamping production will be troublesome, not only delay the construction period, but also may cause the stamping plant to lose customers.




二,加工设备


Two, processing equipment




冲压模具厂应该拥有最基本的模具加工设备,比如:线切割、钻床、磨床、车床等机械设备。如果模具厂本身设备不足的话,周边还需要有相应的外协厂家,像加工中心、慢走丝、热处理等等。如果设备太过单一,而且周边也没有相应的外协厂家的话,遇到一些比较精密或者比较复杂的冲压模具,是很难加工出来的。


Stamping die factories should have the most basic mold processing equipment, such as: wire cutting, drilling machines, grinding machines, lathes and other mechanical equipment. If the mold factory itself is not enough, the surrounding manufacturers also need corresponding manufacturers, such as machining center, slow wire, heat treatment and so on. If the equipment is too single and there are no corresponding manufacturers around it, it is difficult to work out some more sophisticated or more complex stamping dies.


冲压模具加工


Stamping die processing




三,制造工期


Three, the time limit for manufacturing




现在冲压件市场竞争激烈,产品更新换代也比较快,所有产品越早上市就越能抢占商机。这就要求模具必须要有比较短的加工工期。而且,太长的制造工期也会给客户造成不好的印象。


Now, the market competition of stamping parts is fierce, and the product upgrading is faster. The earlier the products are listed, the more likely they will be able to seize the business opportunities. This requires that the mold must have a relatively short processing time. Moreover, too long manufacturing time will also cause bad impression to customers.




四,有一定的复杂模具加工经验


Four, there is a certain experience in the processing of complex molds




越复杂的冲压产品相对来说利润也越高,如果模具厂对复杂模具没有加工经验,当面对复杂产品的模具时,就会捉襟见肘了。而且,很多客户有时候提供的都是一些三维图纸,如果没有一定的经验就很难对图纸有全面的认识。一些有经验的模具厂,当看到冲压件图纸或者实物后,一般都是有个大概的思路,这在后续的加工过程能就能减少出错概率,大大提高加工效率。


The more complex stamping products are relatively high profits, if the mold factory has no experience in the complex mold processing, when facing the mold of complex products, it will be difficult. Moreover, many customers sometimes provide some three-dimensional drawings. If there is no certain experience, it is very difficult to have a comprehensive understanding of the drawings. Some experienced die mills, when you see the drawings or objects of the stamping parts, generally have a general idea, which can reduce the probability of error in the subsequent processing, and greatly improve the processing efficiency.