您好,欢迎来到杭州盛迅金属制品有限公司网站!

服务热线:153-5610-9028
您现在的位置: 网站首页>新闻中心
全国热线153-5610-9028

卷帘门装置你步骤要了解下吗

发布者:admin    【2018年08月30日】

想要卷帘门让自己满意,首先要把产品选好,质量是首要,但最为要害的还有它的装置,欧式卷帘门的装置是有严厉的要求的,下面带我们一起来看看详细的操作步骤:


Want to roll shutter door to let oneself satisfied, first of all to choose a good product, quality is the most important, but the most important thing is its device, European roll shutter door device is strictly required, the following take us to see the detailed operation steps:




卷帘门


Rolling shutter door



卷帘门装置你步骤要了解下吗

(1)首先按门体的图纸要求选料、下料。当相同尺度的型材一起下料,来以坚持尺度的共同性。


(1) first choose the material according to the drawing requirements of the door. When the same size profiles are cut together, they adhere to scale commonality.




(2)在门体的结构和管件下料后应放置在焊接平台上放样,等核定好尺度后进行焊接。


(2) The structure of the door body and the pipe fittings should be laid out on the welding platform after blanking, and be welded after the scale is approved.




(3)选用手艺电弧焊,要保证焊接质量,不得有未熔化、未焊透、夹渣、有气孔及烧穿等缺点。焊后要铲除焊渣,焊缝允许修磨,可是不能影响焊件的强度。


(3) To ensure the quality of arc welding, there must be no shortcomings such as non-melting, non-penetration, slag inclusion, porosity and burning through. After welding, the welding slag must be removed, and the weld is allowed to be grinded, but the strength of the weldment can not be affected.




(4)焊接时在为了减小焊接变形,把焊接次序应特别注意,从门体焊接应从中部向两边进行。要坚持焊接时焊缝应均匀共同。焊接时要操控门体结构的平面度的差错尺度、型材杆件距离的差错和门体对角线尺度的差错,对下料尺度和上述各尺度在焊接过程中随时查看。


(4) In order to reduce welding deformation, special attention should be paid to the welding sequence. Welding from the door body should be carried out from the middle to both sides. The welding seam should be uniform when welding. When welding, the flatness error scale of the door structure, the distance error of the bar and the diagonal dimension error of the door should be controlled. The blanking scale and the above dimensions should be checked at any time during the welding process.




(5)外表处理。当门体和附件焊接结束后,应除锈、去污,在然后喷防锈漆和面漆至少两遍,还不得有漏喷及流动等缺点的。


(5) appearance processing. When the door and accessories after welding, should be rust, decontamination, and then spray anti-rust paint and topcoat at least twice, there must be no leakage and flow defects.




(6)地轮和导向轮等外购件装置前先查看其质量,各项技术参数应到达图纸的相关要求。


(6) Check the quality of the earth wheel and guide wheel before purchasing the equipment, and the technical parameters should meet the relevant requirements of the drawings.




(7)可在墙体上固定辅佐轮导向轨,和在地上固定地上轨。装置门碰。


(7) the auxiliary wheel guide rail can be fixed on the wall and the upper rail is fixed on the ground. Installation door collision.




(8)在门体上装置导向轮和地轮。


(8) guide wheel and ground wheel on door body.




(9)装置好减速电机和传动组织。


(9) install the decelerating motor and transmission organization.




(10)在装置操控器和传感器。装置电源线和操控线。


(10) device drivers and sensors. Install power cord and control line.




看完上述的卷帘门装置办法期望对你有所协助,挑选重庆晶宇卷帘门的产品,产品质量有保证,而且具有完善的售后服务。我司愿与新老客户携手并进。


After reading the above-mentioned rolling shutter door device, we hope to help you to select the products of Chongqing Jingyu rolling shutter door. The product quality is guaranteed and the after-sales service is perfect. Our company is willing to work hand in hand with the new and old customers.


上一篇:工业门的安全注意事项 下一篇:没有了